So i have successfully installed a custom recovery on my phone running Marshmallow and also unlocked the bootloader!
Its quite simple actually! ;)
I am not responsible for any damage you make to your phone!
Steps-
1. Download the zip file from the link and extract it.
2. Install both the drivers and then proceed!(The drivers are universal and work for Windows 98,xp,vista,7,8,8.1,10 but in 8,8.1,10 you might need to turn off the digital signature verification-Make good use of google:D)
3.After installing the drivers , connect your phone in switched on and remember to turn on usb debugging in the dev options!
4. Open the unlock_bootloader_... and run the .bat file and follow the on screen steps( All the data will be formatted so make a backup beforehand)
5.After doing this you will void your warranty so make sure you know what you are doing!
6. Now again connect your phone in switched on mode and usb debugging on and run the .bat file of recover installer.. and follow the on screen steps!
7. The default recovery in that folder is Philz Touch but you can download any recovery from this forum and replace the default with the new one!
8.Boom!! Now you have a phone with unlocked bootloader and a custom recovery installed on marshmallow!!:cool: :cool:
9.Flash custom Kernels,Boot Animations, Logos and root your phone running marshmallow and brag!
Downloads--
Bootloader and Recovery.zip(27.4 MB)
Press Thanks:good: if this helped and if you have any querries just use the section below!
Its quite simple actually! ;)
I am not responsible for any damage you make to your phone!
Steps-
1. Download the zip file from the link and extract it.
2. Install both the drivers and then proceed!(The drivers are universal and work for Windows 98,xp,vista,7,8,8.1,10 but in 8,8.1,10 you might need to turn off the digital signature verification-Make good use of google:D)
3.After installing the drivers , connect your phone in switched on and remember to turn on usb debugging in the dev options!
4. Open the unlock_bootloader_... and run the .bat file and follow the on screen steps( All the data will be formatted so make a backup beforehand)
5.After doing this you will void your warranty so make sure you know what you are doing!
6. Now again connect your phone in switched on mode and usb debugging on and run the .bat file of recover installer.. and follow the on screen steps!
7. The default recovery in that folder is Philz Touch but you can download any recovery from this forum and replace the default with the new one!
8.Boom!! Now you have a phone with unlocked bootloader and a custom recovery installed on marshmallow!!:cool: :cool:
9.Flash custom Kernels,Boot Animations, Logos and root your phone running marshmallow and brag!
Downloads--
Bootloader and Recovery.zip(27.4 MB)
Press Thanks:good: if this helped and if you have any querries just use the section below!
No comments:
Post a Comment