Soft-Bricked, can't get computer to detect device

So, i was trying to flash a stock ROM in Odin, and it failed, so now I'm soft-bricked. I was going to go ahead and retry but now I can't get Odin to detect my device. It's a Verizon S5, the G900v. I've installed drivers, uninstalled drivers, tried multiple cables and multiple computers and I get the same thing every time; "USB Device is unrecognized". I can only get it into download mode, but nothing will recognize it. Any help would be appreciated.

[HELP!] Got into a boot loop and now my computer won't recognize my device.

First of all, sorry for the bit of a text wall below, but if you could bare with me, I really need help and would greatly appreciate any comments that could be of help. Thank you.

So I was looking at a thread on how to do something so I changed two lines on build.prop. I made a back up of the original build.prop file. So my phone was able to start up but everything was invisible and couldn't do anything other than use my notification shade and respond to messages. I ended up turning on emergency mode then I turned it off right after and that fixed it. I guess I messed up when I copy and pasted the original build.prop and replaced it with the one that made my phone mess up in the first place. This messed it up my phone even more and now it's in a bootloop. I can only go into ODIN download mode and recovery. I tried clearing system cache but that didn't help at all. The first time my phone messed up it showed up as a drive on a few different computers that I used, but once the bootloop started it won't be recognized as a drive on any of the three computers I tried. It shows up as "Gadget Serial" when in download mode and when it's powered off it shows as SAMSUNG_Android. I have installed the Samsung phone drivers on two of the computers but that didn't help either.

When it shows up as SAMSUNG_Android it shows that MTP USB Device didn't install properly. I was thinking maybe that's what is causing the problem? I am using the original usb cable that came with the phone. Odin recognizes it so I could always restore it with a ROM, but I need to backup my photos (to my fault, I haven't done a backup in awhile) before I restore it to a fresh ROM. No android file explorers show it either, or a root explorer like Droid Explorer. I've also tried to connect it to a mac (third computer) but that doesn't show up either.

Some person suggested to me to restore with a ROM that saves data, but to no avail, I couldn't find one (anybody know of any?)

I was also reading about using the wipe data/factory reset, but I couldn't get a straight answer if it deletes or keeps the data in the SD Card section on the internal storage (does anybody know?)

So I feel like I might be screwed and may lose my photos and other data. If I could connect my phone to my computer properly, I might be able to edit build.prop again to fix the problem. If I can't connect it to my computer ever, is there any other way I could back up my photos or other data? I have a OTG cable if that helps at all.

Some additional info: I'm on a stock ROM, stock kernal, and rooted. And yes I had R/W on when editing build.prop.

So any ideas guys, I really need to get my phone up and running again.
Thanks in advanced.

OPT not getting detected by computer

When I connect to pc I see the icon in "my computer" to install oneplus driver. Even after I install the driver not seeing drive icon to access the opt files

Sent from my ONE A2003 using Tapatalk

Root without computer options

So im out and about ATM and decided to root my S5 again. But i do not have a computer handy and toweleoot doesnt work anymore. Any other options for root without computer? I have attached my phone info. Any information would be helpful.

Attached Thumbnails

 

Cloudy 3.3 Cannot access storage from computer

Hey guys,
I just installed CloudyG2 yesterday. No problems. Today I try to set up Xposed and fiddle around with that (EDIT: To clarify, I did not actually install Xposed.) but I can't get the phone to be recognized by the PC. The only thing that shows up on the phone is the charging slowly message.

• LG drivers are installed and up to date


• The cable is most definitely a data cable


• I have changed the PC connection setting on the phone to MTP


• I have tried two different computers and all their USB ports

I searched and searched but I can't find any solutions outside of what I already checked above.
LG G2 VS980
CloudyG2 3.3
Any thoughts on what I might try next? I'd love to avoid a full wipe and reinstall if at all possible as the only computer I have access to is my work computer and I am off for two days.
Thanks in advance.

Help Request: Plugging into computer 15ish hardrives try to mount

I flashed a zip file and my phone bricked. No recovery, no download mode, no display.
Can anyone connect my pc and try to unbrick this until i learn how to do this.

Why does my computer no longer recognize my phone after doing marshmallow update?

I have two Nexus 6s, one completely stock and one that I just upgraded to Marshmallow. I downloaded sdk and minimal adb and fastboot today in order to install marshmallow. I just plugged in my completely stock unmodified Nexus 6 into my computer to get my photos off my stock Nexus before I send it back to amazon and although the phone charges, nothing pops up for it being a storage device, I switched it between MTP and PTP on the phone but it does nothing, the phone does not show up, same goes for the Nexus 6 that has marshmallow on it, also switched that to MTP. My computer detects the phone because it allows me to eject it from usb but that is about it. Anything else I can try? trying to get pics off the old Nexus before I send it back.

[APP][4.1+] JoJo Remote - Control your Computer Browser using Multi-Touch Gestures

Hello everyone,
I think Multi-Touch Gestures are awesome.
SWIPE, TAP and DOUBLE TAP with TWO and THREE FINGERS, are way more fun than standard cursor moves.
With JoJo Remote (Beta) you turn your android device into a WiFi or Bluetooth remote control for your Computer Web Browser, using Multi-Touch.
Want to switch to one browser tab right? Just SWIPE with 3 fingers right.
Want to go to the previous site page? Just SWIPE with 2 fingers left.
Want to open a link in a new browser tab? Just –DOUBLE TAP with 2 fingers over a link.
Download JoJo Remote app from Google Play.

Features:
Turn your android device into a WiFi or Bluetooth remote control for your Computer Web Browser, using Multi-Touch.
• Go to the previous site page – 2 fingers swipe left
• Switch to one browser tab right – 3 fingers swipe right
• Open a favorite page – 3 fingers tap
• Open a link in a new browser tab – 2 fingers double tap over a link

MORE FEATURES
• Media players control - just open the program (VLC, BSPlayer, Windows Media Player…) and the media panel will appear automatically
• Automatic server detection
• Works with Chrome, Firefox, Opera and Internet Explorer
• Left-click – 1 finger tap
• Right-click – 2 fingers tap
• Scroll – 2 fingers drag up/down
• Highlight text - same gesture as in your laptop touch-pad (finger press, finger lift, finger press, move finger)

Install Instructions:
1. Download JoJo Remote App from Google Play
2. Download and run JoJo Server on your Computer from JoJo-App .com

Requirements:
1. Android 4.1+
2. Java Runtime Environment (JRE) 1.7+ on the computer

Download:
1. Download JoJo Remote App from Google Play
2. Download JoJo Server on your Computer from JoJo-App .com

My truesmart doesnt get recgonized by my computer with windows 10

I bought the Truesmart online and when i got it charged up it came with under the hood with 4.2.2 android,3.4.5 kernel,20140801100312 v2.0 build version,oui 2.1 omate version. I also downloaded these 5 things adbdriver.rar,Bluethooth.zip,MT6572 SW Doc Package.zip,mtpdriver_xp.zip,SP_Flash_Tool_exe_v3. 1336.0.198.zip,when i hooked to my computer it didn't show up on it but it only let charge it and no were did it show the watch at all. So i was wondering if the charging case be the problem? or something else can someone give me some help please.
Thanks Cyclefreek66

Phone is not recognized when plugged into computer...

So I think something on my USB port has malfunctioned... it won't show up in the device manager when I plug it in.

I have tried the sticky thread on Diagnosing USB Driver and ADB issues in Windows. I have searched the forums and internet and tried lots of driver installs and restart this and that.

Recently this started when I wanted to flash Android 6.0 to my phone. During the install with NRT after each erase and flash it would say Waiting for device, and the only way I would get it to proceed was to plug the USB and plug it back in... Now running Android 6.0 it won`t even recognize my device and won`t pop up the menu to choose your usb connection setting.

I have two Nexus 7, one Nexus 7 (2013), and another Nexus 5... and they all work fine and get recognized by the computer.

Please help, and is this fixable. :eek:

My Omate Truesmart watch will not regconize on my computer with windows 10

i have downloaded these SW TOOL for the truesmart watch, adbdriver.rar,Bluethooth.zip,MT6572 SW Doc Package.zip,mtpdriver_xp.zip,SP_Flash_Tool_exe_v3. 1336.0.198.zip and but i need to know what to do with each one since i dont have any directions for them.....i would really appreciate the help so i can use this watch.
Thanks C

Elephone p8 mtk6592 not recognised by computer after flashing a rom

Hi there all,

I have tried to flash a rom but after that now the phone is not working any more; no power, no charging,, no display nothing except the red light and a usb detection sound but it keeps disconnecting from the computer and there is nothing in device manager any more... please help...

thanks in advance...