where device PHICOMM ?

can someone tell me where PHICOMM update or something about that?

When root device for Galaxy J5? SM-J500N0

SM-J500N0 is not yet tested to root?

We want root this device!

And I'm not try to root this device. but.. info share is good support them navercafe!

Some users want root device to Galaxy J5 ( korea model )

:) thanks to first my post read..!!

Will this device have the twrp recovery??

First I do think flash it by computer is annoying!!!
I had read some Threads about the recovery on X86 devices,but I still failed in compiling it...
Will some one want to help me to make the recovery?
Thanks!:):):)

Soft-Bricked, can't get computer to detect device

So, i was trying to flash a stock ROM in Odin, and it failed, so now I'm soft-bricked. I was going to go ahead and retry but now I can't get Odin to detect my device. It's a Verizon S5, the G900v. I've installed drivers, uninstalled drivers, tried multiple cables and multiple computers and I get the same thing every time; "USB Device is unrecognized". I can only get it into download mode, but nothing will recognize it. Any help would be appreciated.

Help cracking software on Windows CE Device!

I'm not sure if I am in the right place to ask this, but here goes.

I work for a land surveying company and we have been using a software called C&G to collect data out in the field. The software runs on a piece of hardware called a data collector. To be more exact, it is an Allegro CX made by Juniper Systems. The device is loaded with Windows CE .Net 4.20 along with a program called PocketDOS. The C&G program runs inside of PocketDOS. The software is SUPER old and the company is no longer around to support it. We have no desire to purchase a new software package as this one works just fine for what we need and everyone is used to it.

We have at least 8 licenses for this software, but the problem is, it is coded to register based on the serial number of the Allegro data collector. We have had multiple data collectors go bad, so we are looking to purchase more units, but we will be unable to register the C&G software on these units because the serial numbers will be different.

So my question is, can anyone help me modify the C&G program and make it so that it does not check the serial of the data collector? That way, we can purchase new data collectors and load the software (that we have rights to) on the new units. If the company were around to support the software, we would be able to call them and they would generate new registration codes.

I can send links to download the software, along with any DLLs you might need from the data collector.

Any help on this would be greatly appreciated! Thanks for your time!

Make android device never before... .. . 100% guarantee

Hey guys before making phone different from other.... You need root

Download xposed installer. .. This is very useful app you run without harming your device. ....
Some app that you never heard. ..
1= xblast best app m love this app
2= live icon app this app change icon in notification for example your what's app shows that he breathe... ..
3=blurred ui app this app make blur notification pannel this very effective as well as look more decent.... ..
4= I font app this app change font of your device.. .. . And u can change font per app....
Shortly I upload all link of these app..... but now I really sorry..... .
You search this app in Google you find it very simple.. ..

is there any way i can use Barclay's banking App on rooted device?

thanks

ZTE MF64 Portable Hotspot Device t-mobile Throttle bypass

I'm very new to this sort of thing, but I can't keep from wondering if they can activate high speed by adding money, there must be a way to stop it from throttling data speed, I know this is a very common topic but I can't find any way to bypass the network throttle on my ZTE MF64 mobile hotspot device from t-mobile, everything I find is for android devices, and I can never get DC Unlocker to work, I don't want to change carriers, I just want high speed all the time... any tips on how or where to look?

Simultaneous Wifi and Ethernet Connection on AMLogicS802 powered device

Dear experts,

I have an issue with my Android multimedia device Orbsmart S82 which is powered by an AMLogic S802 chip. All my devices (phone, tablet, pc, NAS, orbsmart s82) are connected to the internet via Wifi.

To view HD-content on my TV, my plan was to connect my Orbsmart via ethernet cable to my NAS to receive stutter free video output. This works seamlessly. BUT: I cannot turn on Wifi and Ethernet at the same time. So each time I want to view content from my NAS, I have to go to the system settings and enable Ethernet. As Wifi gets disabled automatically by that action, I have to activate Wifi in the system settings in order to be able to view online content. But then, the ethernet interface is turned off again.

No matter what I try, only Wifi or Ethernet can be active.
Does anyone have a similar setup? What is your solution?

Thanks in advance!

[GUIDE] Factory Reset Encrypted Device

THIS PROCESS WILL ERASE ALL YOUR DATA

I encrypted my HTC ONE MAX last day and because of TWRP error in decrypting my partitions,Like:

Code:

---

Mount /SYSTEM.error
Mount /DATA error

---

I decided to decrypte my phone but as I said, TWRP recovery Didn't found any partion on my internal strong.

The solution is simple :

1.Download stock HTC stock recovery :

Stock Recovery Sense 6 - Latest
Stock recovery 3.23.401.1 (Google Drive Download Link) (it's for international version - Find more in other threads)

2.Boot into bootloader -> Fastboot

Use your ADB :

Code:

---

fastboot flash recovery recovery_t6ul-3.23.401.1.img

---

3. Go to your Setting -> Backup & Reset and Reset Your device
your device will reboot and recovery will ERASE ALL YOUR DATA

Now You have Non-encrypted Device

4.in final step you could flash TWRP again Like:

Code:

---

fastboot flash recovery twrp-2.8.7.0-t6ul.img

---

VS980 User, Soon to be Switching, Willing to Donate Device to Dev

I have a mostly good vs980, I can't really sell it for much or give it to family b/c the headphone jack is finicky af (touch the headphones SLIGHTLY and it'll pause music/blare browser stuff out of the speaker) and there's some slight wear and tear, so I figured I'd give it to a developer in need. I was planning on donating it to Mike from PA but given PA just shut down and the thread was locked a couple weeks back, I figured I'd just make this thread to see who wants it. Send the word out to any devs you know who'd want it. New phone (nexus 6p) won't be coming in till mid November, so they'd be getting the phone like late November early December most likely.

Getting "Your device is corrupt." error message after MM upgrade

I flashed my Nexus 9 (Wi-Fi) to Android 6.0 (via manually fastboot'n the image files) and now when the device starts up it gives me the error message below. Everything is stock and its not rooted. The only thing of note is that when flashing the system.img file fastboot threw a failed to allocate error message so I used mfastboot to flash system.img instead. Any ideas on how to resolve this issue?

Your device is corrupt. It can't be trusted and may not work properly.

Visit this link on another device:
g.co/ABH


Sent from my Nexus 9 using Tapatalk

Device sim unlock issue

So I did ths hole unlock process from AT&T and got a SIM unlock code but when I put it on my phone I get a error saying incorrect password I called AT&T and they told me to do the process over again I'm curious if this is because I'm running a non stock rom than the AT&T Rom I'm currently using Viper. Any ideas?

[HELP!] Got into a boot loop and now my computer won't recognize my device.

First of all, sorry for the bit of a text wall below, but if you could bare with me, I really need help and would greatly appreciate any comments that could be of help. Thank you.

So I was looking at a thread on how to do something so I changed two lines on build.prop. I made a back up of the original build.prop file. So my phone was able to start up but everything was invisible and couldn't do anything other than use my notification shade and respond to messages. I ended up turning on emergency mode then I turned it off right after and that fixed it. I guess I messed up when I copy and pasted the original build.prop and replaced it with the one that made my phone mess up in the first place. This messed it up my phone even more and now it's in a bootloop. I can only go into ODIN download mode and recovery. I tried clearing system cache but that didn't help at all. The first time my phone messed up it showed up as a drive on a few different computers that I used, but once the bootloop started it won't be recognized as a drive on any of the three computers I tried. It shows up as "Gadget Serial" when in download mode and when it's powered off it shows as SAMSUNG_Android. I have installed the Samsung phone drivers on two of the computers but that didn't help either.

When it shows up as SAMSUNG_Android it shows that MTP USB Device didn't install properly. I was thinking maybe that's what is causing the problem? I am using the original usb cable that came with the phone. Odin recognizes it so I could always restore it with a ROM, but I need to backup my photos (to my fault, I haven't done a backup in awhile) before I restore it to a fresh ROM. No android file explorers show it either, or a root explorer like Droid Explorer. I've also tried to connect it to a mac (third computer) but that doesn't show up either.

Some person suggested to me to restore with a ROM that saves data, but to no avail, I couldn't find one (anybody know of any?)

I was also reading about using the wipe data/factory reset, but I couldn't get a straight answer if it deletes or keeps the data in the SD Card section on the internal storage (does anybody know?)

So I feel like I might be screwed and may lose my photos and other data. If I could connect my phone to my computer properly, I might be able to edit build.prop again to fix the problem. If I can't connect it to my computer ever, is there any other way I could back up my photos or other data? I have a OTG cable if that helps at all.

Some additional info: I'm on a stock ROM, stock kernal, and rooted. And yes I had R/W on when editing build.prop.

So any ideas guys, I really need to get my phone up and running again.
Thanks in advanced.

Using GER device on FR network (n9005)

Hello ,

Since two years, I live hell with my GSM bought new, but normally intended for the German market.
I tried several operators / sim card but nothing works. Today using lollipop (OTA ) my device is slow, laggy, bugged... and I 'm sick of losing the networks again and again ... so i think i need new software for my device.

Right now I'm rooting the device and then i will need a good rom ..... but which on (?) ( I DL this rom " N9005XXUGPOF3_AryaMod_V7.3_Public " because....I don't know .... it must be correct , right ?)

Then I wonder: Do my network problemes are comming from the fact it's a device for german network....is there anything to do for the modem, maybe it's possible to force it as if it were a device intended for the french network... ?

Here Many questions .... I love this phone , it saddens me to change because of possible software concern... : /

Thank you for your help and for your indulgence for the noob I am.

Best regards

Modele : SM-N9005
Version Android 5.0
Version de la bande de base : N9005XXUGBOD3
Kernel 3.4.0-4540543 dpi@SWDD6216#1
Numero de version LRX21V.N9005XXUGBOE9

Device Name?

What is the Device or nickname for the T-mobile Note 5? Like the Nexus 6 was Shamoo, ect.

6.0 Makes N7 Feel Like a New Device!

Am I alone on this thought? I was really thinking about selling this tablet a month ago and decided to wait for the update, because I knew how terrible Lollipop was/is. I really am glad I waited, this tablet feels like a brand new device! No lag, approximately 650MB being used on average!, battery life is amazing, WiFi connection doesn't drop anymore, so far I can't find a flaw! If I did, there are so many pros to this update it couldn't take away the happiness I feel about what is better!

What do you think? Am I alone on this thought?

Sent from my Nexus 7 using XDA Free mobile app

Driver LGE Android MTP Device

This thread is about the defective installation of the LGE Android mtp device driver. Note that when the phone is on all the drivers seem to work correctly (LGE mobile ADB interface under "android device", G4 driver under "portable devices" and LGE mobile USB serial port).

The issue presents when i switch the phone to "download mode"; in this mode the "G4" driver (which is the LGE Android MTP device) appears not to be working.



The problem persists on three different PCs, either with windows 10 or windows 7 and either with a LG G4 or an LG G3.

I would like to root my G4 device following the firmware flash procedure 10E, but I am not sure that I can flash the device if there is this kind of issue with the drivers. Is it normal that the device appears not to be working?

Gmail and Exchange - Accounts vanish from device

Hi all,

Wondering if anyone else is running into this. I installed the Exchange Services APK from apkmirror, and was able to get Gmail to support exchange accounts. However, after a period of time, the account vanishes from the device. I found some threads on the S6 forum where this also occured, but can't seem to locate a solution anywhere. Anyone have any ideas? I've tried all the usual suspects such as clearing data/cache, etc. No luck. Running stock 5.1.1 on a 920i.

Thanks.

[GUIDE] How To Port FIUI to Any Device

Hello everyone! :cowboy: :D

I'm here again to put togethera detailed guide on "How To Port FIUI", which is a ROM that's improving each day with an iOS-based interface and CM11-based system.

Quote:

FIUI is a Chinese ROM based off of CyanogenMod. The Future Interface UI is made by the AZ Fuga Team! FIUI's concept is simple: Remove redundant features that bloat up the system, maximize functionality, all the while maintaining a gorgeous UI!

Quote:

This guide is applicable to any device and FIUI version.

Having said that, let's start!


1. Understanding Porting:

Quote:

What you'll need: WinRAR Notepad++ (recommended; wordpad is ok) Basic knowledge about copy-paste ;)

First of all, you need to know some concepts:

Quote:

Base ROM: The ROM which is developed for your device. Important: due to FIUI is CM11 based, you could only use CyanogenMod 11 as base ROM.

Quote:

Port ROM: The ROM which you want to port to your device. In this case: FIUI (Doesn't matter for which device is made)

Once we've learnt that. Let's prepare everything to start working.


2. Setting Up the Environment:

Time to organize files and folders before start porting. :highfive:

Quote:

Step 1: Create to different folders in your favourite directory: CM11 (Base ROM) FIUI (Port ROM)

Quote:

Step 2: Take any CM11 which is running on your device and extract it WinRAR. Copy it content in CM11 folder. Then, do the same with FIUI ROM, pasting it content in FIUI folder.

Having done that, you're prepared to port! :laugh:


3. Porting the ROM:

Here's the "difficult" part of this guide.

Quote:

Firstly, delete those folders of Base ROM system/app system/media system/priv-app And replace them with "App", "Media" and "Priv-app" folders from Port ROM (FIUI)

Quote:

In FIUI, go to system/etc/permissions folder and look for com.htc.software.market.xml. If it's available, copy it to system/etc/permissions folder of CM11 Do the same procedure with libAppDataSearch.so, which should be located in system/lib folder of FIUI. *Remember: it doesn't matter if you don't find those files on FIUI ROM*

Quote:

From FIUI, copy "su" file, located at system/xbin. Paste it in system/xbin folder of CM11 and replace it.

Quote:

In CM and FIUI, open framework-res.apk (located at system/framework) with WinRAR, and navigate to the res/xml folder (in both files). Now, move those files directly from CM11 framework-res.apk into FIUI framework-res.apk : eri.xml storage_list.xml apn.xml power-profile.xml One you've done that, copy system/framework folder from FIUI and paste it into CM11 folder. Attention: choose combine content, and replace when asked.

Quote:

Open build.prop of CM11 folder with Notepad++. Paste this code at the bottom of the file: Code: #fiui build fiui.ver.name=beta_x.xx. fiui.ver=1 fiui.navbar=0 fiui.traffic=1 Change the values according to the FIUI version that you're porting. ;)

After that, you've finished the hard work.


4. Repacking the ROM:

Quote:

Finally, go to CM11 folder and select all the content (Meta-INF, boot.img, system, etcetera) and zip them using WinRAR. Now flash it and enjoy a Future Interactive UI :highfive:

Done. You've ported FIUI to your device!

Quote:

Press thanks if I help you ;)

Code:

---

Don't copy my work without my permission.

---

Quote:

I'll be adding screenshots of the procedure for noobs :)