Enabling notifications while using fingerprint?

I get whatsup messages and cant see them before i unlock the screen with my fingerprint.

Is there any way to enable notifications?

Thanks.

Help me understand File structure information when using TWRP

I've used twrp a couple times now don't understand the basic file structure of Android and what folders contain what.

If someone direct me to explanation of this it would be greatly appreciated.
I want to know the folder structure and be explained there basic content.

When using TWRP, to backup up or restore, I'm not sure what folders to select to be backed up or to restore and the concequence of selection the wrong ones.

Attempting to compile using Sabermod

Compiling the code from https://github.com/SaberMod/android_kernel_moto_shamu using sabermod-prebuilts-07042015.tar.xz, arm-linux-androideabi-5.2-08-28-15.tar.xz.

It compiles well, until the very end; Using GNU/Debian here.

Any thoughts what I'm doing wrong? (bit of a new noob) Should I make make "CONFIG_NO_ERROR_ON_MISMATCH=y" to avoid it?

Code:

---

make CONFIG_DEBUG_SECTION_MISMATCH=y
  [...] 
  CC      lib/ratelimit.o
  CC      lib/rbtree.o
  CC      lib/reciprocal_div.o
  CC      lib/rwsem-spinlock.o
  CC      lib/sha1.o
  CC      lib/show_mem.o
  CC      lib/string.o
  CC      lib/timerqueue.o
  CC      lib/vsprintf.o
  AR      lib/lib.a
  LINK    vmlinux
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.data+0x7740): Section mismatch in reference from the variable msm_rpm_match_table to the function .init.text:mpm_irq_domain_linear_size()
The variable msm_rpm_match_table references
the function __init mpm_irq_domain_linear_size()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: vmlinux.o(.data+0x7758): Section mismatch in reference from the variable msm_rpm_match_table to the function .init.text:mpm_irq_domain_legacy_size()
The variable msm_rpm_match_table references
the function __init mpm_irq_domain_legacy_size()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

To build the kernel despite the mismatches, build with:
'make CONFIG_NO_ERROR_ON_MISMATCH=y'
(NOTE: This is not recommended)
/root/SaberMod/android_kernel_moto_shamu/scripts/Makefile.modpost:95: recipe for target 'vmlinux.o' failed
make[1]: *** [vmlinux.o] Error 1
Makefile:901: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 2

---

Using Vodafone's NFC enabled SIM card

Hi guys!

I have recently been given a vodafone NFC enabled SIM.

I wanted to use it, but it seems it relies on having the NFC settings on the phone... what's the point?

Any ideas how to make it work?

Thanks!!!!

How to connect at&t note3 to internet using ethernet cable and usb to lan adapter

I HAVE A USB TO LAN ADAPTER AND A OTG CABLE. I HAVE SEEN IN YOUTUBE THIS TYPE OF CONNECTION AND IT WORKED WELL IN THE VIDEO. BUT IAM UNABLE TO USE INTERNET WITH THIS. I AM USING ANDROID 4.4.4.
PLEASE HELP ME REGARDING THIS ISSUE
I AM ATTACHING THE IMAGE OF OTG AND ADAPTER. PLEASE HELP
https://drive.google.com/open?id=0B_...zFwS29lUjZSRTQ

_BKF_NV_W Failed (Using Upgrade Download tool)

Hi/Hello Sir/Maam

I am a owner of a Cherry mobile Flare S3 mini, which has a Spreadtrum Chipset (Sc8830). My problem is that I accidentally flash a rom that causes it to be deadboot. I look on ways on how to revive it and I find this "Upgrade Download Tool' which is a flash tool for spreadtrum devices. But I can flash my stock rom which is in .pac format through this Upgrade Download Tool because I always get this error "_BKF_NV_W", I dont know what that means and I really need somehelp. Can somebody here help me with this error? I would appreciate any help that will come to you with regards to this. Thanks and I hope that you can help me.

Using an external mic for video recordings - help!

Hi,
I recently bought a Samsung Galaxy S3 for the sole purpose of making video pod casts.

I need an external mic and so go an Edutige 001 to improve the sound.

But I can't get it to work. Is it compatible?

Thanks for your help!

Have been using 4.4.2 Alliance Rom for a year - suddenly stops at first logo

I've been running rooted with Alliance Rom build 32 for about a year with zero problems. The phone battery ran low last night and the phone turned off. When I turn it on it stops at the first logo. I can't get into Philz
recovery. It will go into downloader mode. I tried using Odin to revert to the stock MJ9 I started from when I used Casual. It flashed successfully (stock pit and MJ9) but still gets stuck at the the first logo and won't go into recovery.

SD card is removed. I haven't made any modifications to the phone for the past six months except adding a few well known apps from the store.

Any advice on how to get back to where I can load recovery and proceed to reinstall would be greatly appreciated.

PS.

I would have bought a new phone last year but it seems all the ones I like are bootloader locked. I can live without the stylus (would love a new note though...). Any recommendation on a replacement for the Note 2 would be much appreciated.

Can you transfer large files/music to the GS5 using USB 3.0 port and speeds

This is confusing me. I can only seem to charge on USB3.0 even with the newest Kies drivers, and only transfer and see my sd card space usng 2.0

Is there any downside to opening kies with my ROOTED gs3 plugged in?

Are you using a G4 wireless charger back cave?

I use a LG G4 wireless charger back Charging works reliable and reasonable fast. If you're looking for Qi charging and with protection function this is a great solution.
Here is a 25% off coupon: 7SC8-D8R9VW-CB7P6H
Link: http://www.amazon.com/Ankway-Wireles...+charging+back

Using GER device on FR network (n9005)

Hello ,

Since two years, I live hell with my GSM bought new, but normally intended for the German market.
I tried several operators / sim card but nothing works. Today using lollipop (OTA ) my device is slow, laggy, bugged... and I 'm sick of losing the networks again and again ... so i think i need new software for my device.

Right now I'm rooting the device and then i will need a good rom ..... but which on (?) ( I DL this rom " N9005XXUGPOF3_AryaMod_V7.3_Public " because....I don't know .... it must be correct , right ?)

Then I wonder: Do my network problemes are comming from the fact it's a device for german network....is there anything to do for the modem, maybe it's possible to force it as if it were a device intended for the french network... ?

Here Many questions .... I love this phone , it saddens me to change because of possible software concern... : /

Thank you for your help and for your indulgence for the noob I am.

Best regards

Modele : SM-N9005
Version Android 5.0
Version de la bande de base : N9005XXUGBOD3
Kernel 3.4.0-4540543 dpi@SWDD6216#1
Numero de version LRX21V.N9005XXUGBOE9

Issue flashing firmware using adb to ZE550ML

Hi I tried flashing a custom rom on my ZE550ML last week and now have a soft brick(i think). I have looked through many threads and cannot seem to get the answers I need.
During the flashing of the rom I forced restart after about 15 minutes without indication of installation. I didn't make a nandroid backup like i normally do and wiped system cache. I have nothing on the internal storage now and am trying to push the latest firmware from the asus site to the phone but cant get it right.
I am not sure what I am doing wrong with adb. I have the drivers and the firmware. When I reboot to recovery to apply update from adb, I get error saying "closed".
I change the firmware zip filename after watching other vids and reading different posts. Can someone help me understand if either I can't restore my phone or what I am doing wrong.?Thanks in advance!
my command line reads C:\adb>adb push ULZ008WW.ziip /sdcard/ .

Using screen protector/scratch guard

Hello, I was wondering if anyone here thinks a screen protector should be used with the Moto G 3?

To contribute I'll share my own experience. I first ordered my Moto G 3 with a Sparin Tempered Glass screen protector from Amazon. Two days after getting the phone I went on a trip for a week and on the last day a single grain of sand got in between the screen and the protector, rendering the protector useless. The Tempered Glass was amazing in terms of clarity and resistance to scratches and finger prints. Now I'm using a cheap generic Japanese screen protector. 3 days and it already has a few scratches.

I just want to know if it is really necessary to use a screen protector. The few days I did not use one the screen remained perfect. I just cleaned it with a microfiber cloth. But I'm afraid if I go without the protector I'll eventually see a scratch on the screen and regret all my decisions in life.

Using Note 4 fast charger adapter charges the phone faster !?

Hello guys , i noticed 2 positive things but i am not so sure,

i think that using the Note4 fast charger has charged my phone from 40% to 100% in like about alittle as 30minutes !

the other positive thing which i think is that my Nexus6 didnt heat up o.O whereas using the Turbo Charger heats my phone ( And i dont ever use the phone when i have it plugged in the charger ) .

anybody else with a similar experience here ?

Tmobile s6 edge bootloop after using odin/samsung smart switch

Please help. I have SM-G925T. I have used odin 3.10.7 to flash latest stock firmware. After it says success the phone reboots saying installing system updates then immediately says erasing.. then during boot it gets stuck on logo screen and repeatedly flashes. then when entering into stock recovery a no command android symbol displays. I wipe cache and perform a factory reset and reboot system and same bootloop continues. I also went to samsung smart switch and used the emergency recovery mode and once it completes it restarts phone automatically and still bootloop. I am using the latest OI1 firmware update on the device. I have tried wipe cache partition and factory reset numerous times, I have also flashed bootloader and modem files through odin which pass but still bootloops. I have tried the update before the OI1 which was OH6 and it fails saying check failed on the phones download screen. Only the OI1 passes successfully due to the SWREV is now showing B:3 K:2 S:2 & before I updated to the OI1 it used to say B:2 K:2 S:2. I have tried flashing custom kernel and the latest TWRP it then says kernel is not seandroid enforcing and in Twrp I have preformed wipe and factory reset.. with no luck on getting passed the bootloop. So I reflashed everything OI1 again through odin & preformed the wipe cache partition & factory reset again but still stuck. I have tried safe mode but I cannot boot into safe mode and I have been seeing posts explaining to upload a PIT file but when flashing I have no error when it comes to Get pit mapping so I don't believe that would be needed and I have tried flashing the files I mentioned earlier individually and no go so please if there is anyone that can help me I'd greatly appreciate it. I did not tick anything that I wasn't suppose to in Odin so I'm not understanding after being on the latest version of everything that my phone is still not booting.

MicroSD Card for the S2 - Which one are you using?

I am looking to purchase a MicroSD card for my S2 I want to purchase one that is know to work and you can personally vouch for it in your S2

I have read that certain formats will not work with large (128GB) MicroSD cards. So help me out if you would and let me know what works and what doesn't. I would like at least a 64GB or possibly a 128GB.

Thanks

OTG USB and charging while using USB-Devices

I have this USB-OTG-HUB: http://amzn.to/1P5TkeQ from ACASIS.
If I boot on Win 8.1, I can charge AND use USB-Devices (like USB-Stick, Mouse...) at the same time.

This shows me, that the Tablet must have OTG Support.

But if I start Android, I can only charge, OR use USB-Devices. Is there a way to fix this in Android?

Can i Stock rom a phone using ADB Commands in PC ANDROID SDK?

My Phone Doesnt Recgonize by PC or ODIN HELP ME PLSSS

How to flash Mi4c weekly ROM using TWRP?

The European Mi4c weekly ROM was released today, and according to the website I should flash the ROM using TWRP. I've managed to root and install TWRP on my phone, but what next? There weren't really any clear instructions over there, and I've never done any of this before and so I don't wanna risk bricking my phone.

So, how do I install the ROM? Do I need to wipe my caches or do a factory reset? Where do I place the ROM for installation?

Thanks guys. Sorry for such an obvious question.

Alarm + Localizator by using a Samsung GIO

Hi!

I'm looking for a way to boot up my Samsung GIO when is being charged.
My purpose for that is using sensors, gps and gsm for turning the phone in a advanced alarm+gps locator (and wifi enabled ap just to detect the position) to be incorporated in a electric bicycle, I will be using tasker app for that. .

This device will be powered by the sun. :)
But for that, I really do need this feature.

I've tried all the methods by using fastboot or to change the charging animation, it doesn't exist on this device, and I've tried some alternative roms.

So, if someone can help me on archieve this project, I'm sure that I will donate something :)