[Guide] Rooting the G800H on lollipop 5.1.1

Since the stock 5.1.1 was released
no one here on XDA made a root for it
but Blue cat 4pda member did : D
so im just sharing his work nothing else


Link to his threadhttp://4pda.ru/forum/index.php?showt...#entry43655190



if you cant register in the Russian forum then here's the files on dropbox thanx to falcaobr



https://www.dropbox.com/s/wjpsa77tce...Files.zip?dl=0




Installation sequence:

1) Enter the download mode and install firmware 5.1.1 through Odin. To reboot and enter the Lollipop everything is working;
2) Again in download mode, install the modified kernel (Kernel.tar) via Odin (use AP or PDA, depending on the version of Odin) and reboot;
3) Again in download mode, install TWRP via Odin and reboot;
4) Save "BETA-SuperSU-v2.50.zip" to SDCARD (internal or external);
5) Reboot into Recovery mode (TWRP) and install "BETA-SuperSU-v2.50.zip";
6) Restart and will be with root.

Note: Those who do not allow write to the SDCARD with Lollipop 5.1.1, install the program " FolderMount" after root and run the first time he will ask to start and fix this problem



Also if you lost your SIM and WiFi after updating to 5.1.1 try this http://forum.xda-developers.com/gala...pdate-t3224352






Big thanx to Blue cat and @falcaobr i just shared thir effort


And sorry for my bad English

Happy rooting : )

[GUIDE] [MEDIATEK] How To Port Lollipop Based ROMs for MTK Kitkat Devices

How To Port Lollipop Based ROMs for MTK Kitkat Devices

Only For Mediatek SOCs

This guide applies to same chipsets:

Example:
MT6577 to MT6577
MT6589 to MT6589
MT6572 to MT6572
MT6582 to MT6582

And works also for:

MT6589 to MT6577
MT6582 to MT6572
MT6577 to MT6575


Before starting this tutorial, please make a backup of your ROM
I am not responsible for any damage to your device, this guide is for expert users.

You Need:

- Winrar, 7-Zip or similar
- Notepad++
- Tool for unpack/repack mtk boot.imgs
- Kitkat Stock ROM
- Lollipop ROM for port
- Brain :p

Step 1.- Unzip the port Lollipop ROM and your stock ROM also.



Step 2.- Delete this files or folders in port ROM and replace with your files from Stock ROM:

Code:

---

-system/etc/firmware
-system/lib/hw
-system/lib/egl
-system/usr/keylayout/Generic.kl
-system/vendor

---

Step 3.-.Rename you stock boot.img to stockboot.img and the port boot.img portboot.img. Unpack the boot.imgs, compare the fstab(ramdisk/fstab) and make changes in fstab from portboot.img(open it using notepad++). Use zImage from your stockboot.img and the ramdisk from portboot.img, recompile and replace in port rom folder.




Step 4.- Open the updater-script in META-INF in port rom, open it with Netepad++. Edit the mount points(compare with your updater-script from stock META-INF)



Example:

Code:

---

format("ext4", "EMMC", "/dev/block/mmcblk0p7", "0", "/system");
format("ext4", "EMMC", "/dev/block/mmcblk0p5", "0", "/data");
mount("ext4", "EMMC", "/dev/block/mmcblk0p7", "/system");

---

Step 5.- Zip the port ROM and flash it in recovery mode, enjoy.:highfive:

[GUIDE] Factory Reset Encrypted Device

THIS PROCESS WILL ERASE ALL YOUR DATA

I encrypted my HTC ONE MAX last day and because of TWRP error in decrypting my partitions,Like:

Code:

---

Mount /SYSTEM.error
Mount /DATA error

---

I decided to decrypte my phone but as I said, TWRP recovery Didn't found any partion on my internal strong.

The solution is simple :

1.Download stock HTC stock recovery :

Stock Recovery Sense 6 - Latest
Stock recovery 3.23.401.1 (Google Drive Download Link) (it's for international version - Find more in other threads)

2.Boot into bootloader -> Fastboot

Use your ADB :

Code:

---

fastboot flash recovery recovery_t6ul-3.23.401.1.img

---

3. Go to your Setting -> Backup & Reset and Reset Your device
your device will reboot and recovery will ERASE ALL YOUR DATA

Now You have Non-encrypted Device

4.in final step you could flash TWRP again Like:

Code:

---

fastboot flash recovery twrp-2.8.7.0-t6ul.img

---

[GUIDE] How To Port FIUI to Any Device

Hello everyone! :cowboy: :D

I'm here again to put togethera detailed guide on "How To Port FIUI", which is a ROM that's improving each day with an iOS-based interface and CM11-based system.

Quote:

FIUI is a Chinese ROM based off of CyanogenMod. The Future Interface UI is made by the AZ Fuga Team! FIUI's concept is simple: Remove redundant features that bloat up the system, maximize functionality, all the while maintaining a gorgeous UI!

Quote:

This guide is applicable to any device and FIUI version.

Having said that, let's start!


1. Understanding Porting:

Quote:

What you'll need: WinRAR Notepad++ (recommended; wordpad is ok) Basic knowledge about copy-paste ;)

First of all, you need to know some concepts:

Quote:

Base ROM: The ROM which is developed for your device. Important: due to FIUI is CM11 based, you could only use CyanogenMod 11 as base ROM.

Quote:

Port ROM: The ROM which you want to port to your device. In this case: FIUI (Doesn't matter for which device is made)

Once we've learnt that. Let's prepare everything to start working.


2. Setting Up the Environment:

Time to organize files and folders before start porting. :highfive:

Quote:

Step 1: Create to different folders in your favourite directory: CM11 (Base ROM) FIUI (Port ROM)

Quote:

Step 2: Take any CM11 which is running on your device and extract it WinRAR. Copy it content in CM11 folder. Then, do the same with FIUI ROM, pasting it content in FIUI folder.

Having done that, you're prepared to port! :laugh:


3. Porting the ROM:

Here's the "difficult" part of this guide.

Quote:

Firstly, delete those folders of Base ROM system/app system/media system/priv-app And replace them with "App", "Media" and "Priv-app" folders from Port ROM (FIUI)

Quote:

In FIUI, go to system/etc/permissions folder and look for com.htc.software.market.xml. If it's available, copy it to system/etc/permissions folder of CM11 Do the same procedure with libAppDataSearch.so, which should be located in system/lib folder of FIUI. *Remember: it doesn't matter if you don't find those files on FIUI ROM*

Quote:

From FIUI, copy "su" file, located at system/xbin. Paste it in system/xbin folder of CM11 and replace it.

Quote:

In CM and FIUI, open framework-res.apk (located at system/framework) with WinRAR, and navigate to the res/xml folder (in both files). Now, move those files directly from CM11 framework-res.apk into FIUI framework-res.apk : eri.xml storage_list.xml apn.xml power-profile.xml One you've done that, copy system/framework folder from FIUI and paste it into CM11 folder. Attention: choose combine content, and replace when asked.

Quote:

Open build.prop of CM11 folder with Notepad++. Paste this code at the bottom of the file: Code: #fiui build fiui.ver.name=beta_x.xx. fiui.ver=1 fiui.navbar=0 fiui.traffic=1 Change the values according to the FIUI version that you're porting. ;)

After that, you've finished the hard work.


4. Repacking the ROM:

Quote:

Finally, go to CM11 folder and select all the content (Meta-INF, boot.img, system, etcetera) and zip them using WinRAR. Now flash it and enjoy a Future Interactive UI :highfive:

Done. You've ported FIUI to your device!

Quote:

Press thanks if I help you ;)

Code:

---

Don't copy my work without my permission.

---

Quote:

I'll be adding screenshots of the procedure for noobs :)

[GUIDE] [Easiest Method] Root Your Galaxy Grand GT-I9082 Without PC And Install CWM

Easiest Method

STEP:1
Download Kingroot v3.3.1.apk From the Attachment Below.

STEP:2
Now Open The App And Wait then Click On Root Now (Written In Chinese)

STEP:3
Wait For 3-5 Minutes

STEP:4
Done, You Have Successfully Rooted Your Device.

If You Want To Replace Kinguser With SuperSu Then,View This Thread
http://forum.xda-developers.com/gala...guser-t3222761

How To Install CWM (ClockWorkMod) Custom Recovery

STEP:1
Download TWRP Manager (Team Win Recovery Project) From Playstore

STEP:2
Now Open TWRP And Select Device Name And Below Select "Recovery Version To Install.

STEP:3
Select "2.8.6.0 twrp-2.8.6.0-i9082.img

STEP:4
Then, Select Install Recovery

STEP:5
It Will Downloaded And Install Automatically

STEP:6
Now Download CWM From Below Attachment And Put It In Your External SD Card

STEP:7
Now Go In Recovery By Holding Power+Volume Up+ Home Button Together

STEP:8
Now Flash The Zip File

STEP:9
Now Reboot Your Phone

Congrats, You Have Successfully Installed CWM

Note: Make A Nandroid Backup Or Full ROM Backup Before Modifying Your System

Attached Files

	kingroot%20v.3.3.1.apk - [Click for QR Code] (1.38 MB)
	CWM_6.0.5.0_Non_Touch_xenon92.zip - [Click for QR Code] (7.44 MB)

[GUIDE] [Easy Method 100% Working) Replace Kinguser Or Kingroot With SuperSU

Personal Experience

I Rooted My Samsung Galaxy Grand Via Kingroot v.3.3.1.apk but the problem is that Sometimes Kinguser Doesn't Grant Permission to the Apps, Also Very Irritating
Many Apps Requires SuperSu Support.So I had Done this Method

Method :
Note : Custom Recovery Must Be Installed (CWM or TWRP)
Before Proceeding This Method
1)Open Kinguser App
2)Go In Kinguser Settings And Remove Root Permission
3)Use Any File Manager And Create A Zip File e.g.SuperSu.apk to SuperSu.zip And. Put It In Your External SD Card
3)Now Go Into In Recovery By Vol Up+Home+Power Key
4)Now Flash The Zip File (Install zip from Sd Card And Select From SdCard1 SuperSu.zip) It Show An Error Because It Is User Created Zip
5)Before Flashing It Shows Your Phone Is Not Rooted "Root Now"
6)Select Yes
7)Now Reboot Your Phone
8)Install SuperSU.apk Normally
9)Open SuperSU And Install Su Binary Normally
10)Go In SuperSu Settings And Install SuperSU in System
11)Reboot Your Device
12)Congrats,You have Replaced Kinguser With SuperSU

Download The Latest Version Of SuperSU.apk

Hit,Thanks If This Method Works For You

[GUIDE] How to convert NAND ROM to SD-EXT ROM for MultiBootloader

How to convert NAND ROM to SD-EXT ROM for MultiBootloader

Code:

---

After following this guide, your ROM can be use with MultiBootloader

---

Requirements

• Knowledge about Android Image Kitchen


• Notepad ++

Instructions

Step 1: Modifying boot.img

• Use Android Image Kitchen's unpackimg command to unpack the boot.img file from the ROM your want to port.


• Go to \ramdisk folder, edit these files:

  1. fstab.qcom
     
     
     
     

     
     Make it look like this:
     

     
     

     Code:

     
     

     ---

     # Android fstab file.
# The filesystem that contains the filesystem checker binary (typically /system) cannot
# specify MF_CHECK, and must come before any filesystems that do specify MF_CHECK

#TODO: Add 'check' as fs_mgr_flags with data partition.
# Currently we dont have e2fsck compiled. So fs check would failed.

#<src>                                                <mnt_point>  <type>  <mnt_flags and options>                    <fs_mgr_flags>
/dev/block/mmcblk0p2                                  /system      ext4    ro,barrier=1                                wait
/dev/block/mmcblk0p3                                  /data        ext4    nosuid,nodev,barrier=1,noauto_da_alloc,discard      wait,check,encryptable=footer
/devices/msm_sdcc.2/mmc_host                    /storage/sdcard1  vfat    nosuid,nodev                                wait,voldmanaged=sdcard:auto
#/dev/block/mmcblk0p11        /system      ext4    ro,barrier=1                                wait
#/dev/block/mmcblk0p12      /data        ext4    nosuid,nodev,barrier=1,noauto_da_alloc      wait,check,encryptable=footer

     ---

     
     

     The line: /dev/block/mmcblk1p2 /system ext4 ro,barrier=1 wait is for mounting the 2nd parition of sdcard as system
     The line: /dev/block/mmcblk0p3 /data ext4 nosuid,nodev,barrier=1,noauto_da_alloc,discard wait,check,encryptable=footer is for mounting the 2nd parition of sdcard as system
     
     

     
     
  
  
  2. init.rc
  
  
  3. init.target.rc
  
  

<EDITTING>

Android 5.0 Lollipop on Lenovo A706 [Installation Guide]

The users of Lenovo A706 can now upgrade their mobile to Android 5.0 Lollipop using custom rom. The new Android 5.0 Lollipop comes with many new features :
– Up to 4x performance improvements.
– A battery saver feature which extends device use by up to 90 mins.
– It has a faster, smoother and more powerful computing experience.
– Support for 64-bit using ARM, x86.

Notes :-
1) You should backup your important data before installing android 5.0
2) The mobile should have at least 80 percent of battery.
3) Enable usb debugging.
4) During the installation, if the device gets stuck on booting, users can perform wipe cache partition and wipe dalvik before rebooting the phone.

Follow the given steps to install android 5.0 on Lenovo A706 :-

• Download Android 5.0 Lollipop ROM from link below :
  The ROM File size is 128 MB, so I split the file into 3 parts :
  ROM Part 1 : http://goo.gl/7pyL97
  ROM Part 2 : http://goo.gl/ffHU2x
  ROM Part 3 : http://goo.gl/l1zKh5
  To combine 3 parts files above into 1 file just use WINRAR, then extract the files into ZIP format.
  If any problem with the ROM, maybe because the ROM have corrupted during the download process, you can try to re-download the ROM.

• Install the ROM Manager on your Lenovo A706. Get it from Google Play Store, then install the clockwork mod recovery. You also can use ROM Installer application from JRummy Apps Inc.(Get it from Google Play Store).

• Connect your Lenovo A706 to your PC using the usb cable. Copy the “ROM.zip” file you downloaded to the sd card.

• Restart your device in the recovery mode using ROM Manager. In Recovery Mode, go to ROM Manager and select backup/restore to back-up your imp data.

• From the Recovery Menu do a total data erase (including Delvik Cache). After Installation, go back to recovery menu and choose Flash ROM from SD Card. Navigate the location you copied the ”ROM.zip” file and follow the directions for installing Android 5.0 Lollipop on your Lenovo A706. After installation, just reboot your Lenovo A706 and you will see that, you’ve just upgraded it to the new Android 5.0 Lollipop.

It worked very well for me. Runs smoother and faster all ok.

HTC HD2 T-mobile starter guide?

Hi, I'm new to this forum, as i've just got an old hd2, and start to play around with it.
Now i know all the "search before asking" stuffs, but the problem is that: my hd2 is now on android (4.4.4, cm version: 11.0-M9-leo), and the some parts of phone has been replaced that even the imei on the backside and in the firmware doesnt match, and on the phone there is no tmobile logo at all.
I want to put it back to wm6.5, and to learn to install android all over again, but as i read about hd2 someone say that flash normal wm fw on a tmus hd2 would brick the phone
I want to ask: how to clearly verify what version of hd2 i'm using now, and with that in mind maybe going back to wm would be easier :)
And also my reset button is not red, so maybe it tmus then, but i wanna know for sure since it involved bricking risk

I want name guide or link guide add ram on statusbar! please!

I cant guide add ram on stt3.

[GUIDE] How to get Folder Mount working

Hi, for does who have a problem by Folder Mount app and moved big data to extern SD, please follow this steps to get it working.
1. Install App SELinuxModeChange (last version v3.2 - Root required)
2. Open app and choose mode : PERMISSIVE.
3. Open Folder Mount and move big data to ext SD successful:)
4. Be happy and have a lot of free internal SD memory:)

A Step by step guide to update rom

Hi friends,
I am using mmx a117 and want to upgrade rom.

I have found some roms here in xda, but not completely sure about how to update,
My main aim is to increase internal memory from 1 gb to maximum.
and second aim is to get any update on jellybean like lolipop or Marshmellow

I request you to please guide me step by step to update rom. am new n never did anything recovery mode.

pls guide

thanks

Battery guide for Marshmallow

I installed Marshmallow a couple of days back. With features like Doze I expected better battery life with the stock experience (I previously had Xposed with Amplify Pro and Greenify Donate along with Power Nap, so I used to lose about 2℅ battery overnight.) However I lost 20℅ battery overnight. These are some tweaks I applied and last night I didn't even lose a single per cent overnight.


1. Use Greenify, it works even better on Marshmallow. It compliments Doze which kicks in only after an hour of the phone being stationery. (Search for the Greenify post on Doze in Google Plus)
2. Head over to the Apps tab and press the gear icon on top. Then proceed to disable unnecesaary App Permissions. You will be amazed how appls like Hotstar use body sensors which is totally not needed.
3. Enable Developer Options and head over to the tab called inactive Apps. Toggle Apps you rarely use.
And that's it! Let me know how it goes for you along with how much standby time you gained.

[GUIDE] Viper4android working with tunein

Hi,
I've seen many people asking on how to make it work and I've been using this method for few years and it has never failed me.

Please remember to backup your ROM before doing any changes, there is a high risk that it may not work on lollipop (and sometimes on lower versions).


So what you need to do:
1) For Kitkat users (and lower) just flash this mod:
https://app.box.com/s/ntw15vccmlxxbznma8ka

I think that it's just some old version of eXtremeBeats audio mod (downloaded few ears ago, so can't remember), so all the credits go to Ben Feutrill.
I just modified the zip a bit, because the normal one caused on Galaxy S4 that the microphone didn't work during the call.

2) Lollipop users.
Here it get's harder....
Flashing the package mentioned in point 1) caused an audioFX FC on all CM12.1 (and maybe CM12) ROMS for me.
However it does work just fine with Sony's 5.0.2 ROMs.

But don't flash it on Sony's stock 5.1.1 as it will cause microphone problems during the call.
So what you have to do (except the standard operation of installing Viper on lollipop) is to install this mod: Extreme Beats v4.
Now the most important thing is to flash this file: https://app.box.com/s/9bkhjmtqlex8stodotcfms7nho533jfg.

I did some calling tests and the person on the other side was able to hear me, so it should be working fine, however some feedback would be nice, as I don't use lollipop myself.
Btw. You can try just to install the second file (without the Extreme Beats audio mod), but idk. if it will work.


FYI: I did test "audio mod.zip" on many devices, but only until android 4.4.x. All the tests performed with lollipop were done only on sony device, so I don't know how it will work on different phones.
If you can, please leave the feedback for the others.

I hope this thread will help many people to enjoy Viper experience with this great music app.

[GUIDE] [ROM] Flashing stock ROM for YU Yunique YU4711 [WORKING METHOD]

YU YUNIQUE YU4711 STOCK ROM

Disclaimer: Flash this at your own RISK!! I AM NOT RESPONSIBLE FOR ANY TYPE OF BRICK

YU Yunique AOSP STOCK ROM Files so I am sharing with you all. I have personally Tested the Files on my Device and these files are completely working.
Now You Can Escape Soft Brick and Revert To stock anytime :)

Contents of the ZIP :
Drivers
Firmware
Flash Tool

REQUESTING YOU ALL TO READ THE FLASHING MANUAL THOROUGHLY AND PROCEED ACCORDINGLY

YOU WILL FIND A FLASHING MANUAL IN THE ZIP { DO NOT FOLLOW THAT IT IS NOT WORKING }

Procedure :
Download my working and tested Flashing Manual And Follow it LINK
Press The LIKE Button ,Which you all forget most of the times :D


Download Section :

LINK
Please Share your Feedback and Press THANKS if you are Thankful to ME ;)

[GUIDE] How to spot a FAKE Mi Note Pro

Clones of famous smartphones are quite popular both in China and other parts of the world. So, it was not surprising to see Xiaomi Mi Note clones come up online via websites like Taobao. The clone looks so identical to the original model that its very hard to distinguish between the two just by looking at the two devices.

However, we are here to tell you how you can spot the fake Xiaomi Mi Note from the real one. So, anyone who is planning to buy a Mi Note make sure to note the points given below.


What to check when buying a new Xiaomi Mi Note?

1.First of all, check the build quality of the device. Although design wise, a fake one will look like the real one, the quality of workmanship is poorer in the fake Xiaomi Mi Note, so if you feel something is not at its right place, then its very likely that you are looking at a fake one.



2. The recent Xiaomi Mi Note clones that have come up for sale are made out of plastic. On the other hand, the real Xiaomi Mi Note is made from solid glass. As a result, if the device feels like its made out of cheap plastic, then you’ve got the fake one in your hands. Return it immediately!


These were the things that helped you identify the device even before starting up the device. Now, lets look at what you can check after booting it up.


3. If you have been unsuccessful in spotting a clone by now, don’t worry. There are several things that you can check once the device has booted up to ensure that your Mi Note is real. Firstly, the cheap Mi Note clones have a blue tint on the display. This is due to the cheap display panel used inside the device. On the other hand, the original Mi Note’s display looks quite crisp and balanced. Also, the resolution will be too low for a device as good as a flagship device.


4. The next thing you can do is run some tests. Most benchmark tests will instantly reveal the actual performance of the device. The scores will be much lower than Xiaomi Mi Note’s 46000+ scores. Expect the clones to score about 18000 points, thanks to the modest 1GB RAM and MT6582 (probably) SoC inside. This is a sure indicator that your Mi Note is a fake, and you should instantly replace it or avoid purchasing it.

As you can see, once you boot up the device and run some tests, its quite easy to identify the fake one from a real Xiaomi Mi Note. Don’t just go by the design and the built, looks can be deceiving. So, its always better to go for trusted resellers while purchasing a new smartphone.


Source

[GUIDE] Fix No Network Signal Error in Mi Note/Pro

Hello Mi Note/Pro Users,

Today I'm here to solve the problem of No network signal error in your Mi Note/Pro by giving you a simple tutorial that you can do it yourself easily. Note: This tutorial can be used for both Mi Note/Pro.The steps are same, but make sure you use the correct file for your device.


For this tutorial we need some things, so let's get the things ready before starting the tutorial

1. We need Mi Flash Tool. So Download MIUI Rom Flashing Tool and install it in your computer.


2. Download the Modem file for your device: For Mi Note: Click here. For Mi Note Pro: Click here. The zip that you downloaded needs to be extracted to get the modem file. The modem file that you get after extracting the zip file would be named like this NON-HLOS.bin

Now let's get started.

1. Turn off your phone and enter your phone into fastboot mode. (For entering into fastboot mode, Press volume - and Power button together until you see the fastboot image on your phone.
   


2. After entering the phone into fastboot mode, Connect your phone to the computer.


3. Since you have installed MIUI Flashing tool, go the Android folder of the MIUI ROM Flashing tool, ie C:\Program Files (x86)\Xiaomi\MiPhone\Google\Android. MIUI ROM Flashing tool will be installed to the above location by default.
   
   


4. Copy and Paste the modem file (NON-HLOS.bin) to the folder mentioned in the above step. Some times your pc will ask to provide administrator permission to paste the modem file to the above mentioned folder like this:
   
   


5. Press continue and the file will be copied and pasted to the folder C:\Program Files (x86)\Xiaomi\MiPhone\Google\Android.


6. Hold down the left Shift key on your keyboard and right click inside this folder and then select Open command window here.
   This will launch the command prompt screen like this.
   
   
   
   


7. Type the command fastboot flash modem NON-HLOS.bin and press the Enter key to flash the modem like the one in the screenshot below. The screenshot below is actually of the Redmi 2 phone, so for Mi Note/Pro it will be slightly different. The modem will be flashed successfully and type in fastboot reboot to reboot your phone.
   
   
   


8. Your network should be back after that. Enjoy.
   

Source

Special thanks to @Technoking2020
The modem files for this tutorial of MI Note/Pro are extracted from the fastboot developer rom of the respective devices.

Knowledge Base | Starters Guide | ROM Mirrors | FAQ

Knowledge Base | Starters Guide | ROM Mirrors | FAQ

Developer ROM + SuperSu Root + Custom TWRP Recovery + google apps
Download these:
- mi note pro developer rom (full ROM pack) from http://en.miui.com/download-273.html or from a mirror in the second post
- copy the zip to your device (dont extract the zip)

- twrp.img from https://mega.nz/#!q40WWSIB!tZN38HAzp...UPaIZkxt3Bfiak
- copy the img file to your device

- opengapps in the configuration: ARM64 > 5.1 > nano from here: http://opengapps.org/
- copy opengapps zip to your device (don't extract the zip)

Then:

1. flash developer rom via updater app (click menu > choose update package > select downloaded rom zip)


2. wait until rom is completely flashed and phone reboots automatically


3. install super su from google play, start it, allow root access, let it install super su binary via normal mode


4. install flashify from google play, start it and grant root access


5. flash the twrp recovery.img file in flashify


6. turn off phone, boot into twrp recovery (hold power + volume up button until it boots into recovery)


7. flash (install) opengapps nano zip in twrp recovery


8. be happy with a stable system

Important: You permanently flashed TWRP recovery, so the MIUI Updater app will not work. If you want to update your rom, just download the full developer ROM from http://en.miui.com/download-273.html to your device. Reboot to TWRP recovery (hold power + volume up button) and install the downloaded full ROM zip.

Change Fonts to any font (not using Theme Store fonts)

1. Install iFont from Google Play: https://play.google.com/store/apps/d...com.kapp.ifont


2. Use one of the fonts in the app or copy your own font into sdcard/iFont folder


3. Dont use MIUI Mode from iFont, use the root mode to apply fonts


4. Device will reboot and new font will be applied automatically without using theme store fonts

Remove spell-checker (red underlines) when typing

1. turn on developer options (Go To "Settings > About Phone > MIUI version" and tap "MIUI version" many times until developer mode appears)


2. turn on usb debugging in developer options ("Settings" > "Additional Settings" > "Developer Options" > "USB Debugging")


3. on your PC downlolad and install minimal adb and fastboot drivers ( http://forum.xda-developers.com/show....php?t=2317790 )


4. connect your device via usb to your PC, wait 2 minutes until adb drivers have been installed


5. run the installed adb link in your start menu, a cmd window opens op


6. enter:
   
   

   Code:

   
   

   ---

   adb shell

   ---

   
   
   and press enter


7. enter:
   
   

   Code:

   
   

   ---

   settings put secure spell_checker_enabled 0

   ---

   
   
   and press enter


8. close cmd, disconnect phone, spell checking is disabled

Notifications are delayed for Whatsapp and other apps
Install https://play.google.com/store/apps/d...imax.pushfixer and set all heartbeat times to a lower value

1. Open the apps you want to allow running on background and send you instant push notifications (Whatsapp etc)


2. Press Menu button


3. You see the opened apps in your taskmanager.


4. Swipe down all the apps that you want to let run in the background.


5. A small lock icon will appear above them.

Preview app screen in taskmanager

1. When you open the task manager by pressing the menu button, pinch out with two fingers.


2. A preview of all apps will be displayed in your task manager from now on (even after a reboot)

Android Marshmallow 6.0 OTA Universal to all Sprout4 Devices (Guide)

MAKING A UNIVERSAL MARSHMALLOW OTA FOR ALL SPROUT4 DEVICES

NOTE : To install Android 6.0 Marshmallow on your sprout4 device , you should be on unrooted stock lollipop build LMY48M.

I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE.
DO IT AT YOUR OWN RISK.!!!!

DOWNLOAD OTA UPDATE FROM HERE :- DOWNLOAD OTA HERE

After downloading OTA Update Follow the steps below :-
1. Unzip OTA Update zip to any folder.
2. Navigate to OTA_Update_Unzipped_Folder/META-INF/com/google/android/
3. You will updater-script file there
4. Now delete that file and download the modified updater-script file from below link and copy it there
DOWNLOAD FILE HERE
5. Now repack the rom in a zip file using winrar or winzip with compression method 'Store'.
6. Copy this rom in your phone and flash it using Touch Philz recovery
and Thats it! ;)
You can flash this rom on any sprout4 device.
I have test this method on my phone and its works fine. :)
If you find any difficulty you can PM me.

IF THIS HELPS YOU THEN DONT FORGET TO HIT THANKS BUTTON:good:

[guide] || [complete] how to get marshmallow on ur android one right now>>

hello guys its too late but im going create this thread though one who still didnt get the update notification on android one, even if u r on custom or full stock doesnt matter here is the full guide to get android marshmallow right now


REQUIREMENTS:

1. ANDROID ONE {OFCOURSE}
2. A BRAIN {SHOULD KNOW ABOUT FLASHING ROMS}
3. ROMS (LINKS BELOW)
4. FULL STOCK LMY48M RECOVERY(IF ONE WHO ON FULL STOCK_NON ROOTED)
5. A CUSTOM RECOVERY LIKE PHILZ|TWRP
6. PATIENCE (COZ. ITLL TAKE SOME TIMES)


HOW TO GET M TASTE :

1. IF YOU ARE ON FULL STOCK LMY48M NON ROOTED THEN JUST GO TO SETTINGS N CHECK FOR THE UPDATE IF ITS AVAIL THEN YOU WILL GET A POPUP IF NOT THEN TRY TO FORCE AN OTA.

2. HOW TO FORCE AN OTA::>BASICALLY GOOGLE OTA IS AN RANDOM PROCESS SO CHANCES OF UR ANDROID ONE M OTA IS ONLY 1%% SO, FORCE AN OTA BY GOING TO SETTINGS>APPS>SEARCH FOR ALL >UNDER THE HEAD OF ALL FIND >GOOGLE SERVICES FRAMEWORK>TAP IT CLEAR ITS DATA ,FORCE STOP IT! YEAH THEN GOTO LOCATIONS SETTINGS & PUT YOUR LOCATIONS TO HIGH ACCURACY MODE! NEXT MOVE TO SETTINGS AND ABOUT PHONE AND JUST TAP CHECK FOR UPDATE,THEN ITLL ASKS TO AGREE LOCATIONS SETTINGS SO WITHOUT QUOTE CHOOSE YES,THEN WAIT FEW SECONDS ITLL POP_UP ANDROID M OTA ON UR ANDROID ONE :)

3. IF U GOT OTA THEN TAP DOWNLOAD BUTTON AND INSTALL IT.

4. SOMETIMES FORCE AN OTA WILL NOT WORK SO DONT WORRY! IF U ARE STILL ON FULL STOCK LMY48M AND FULL STOCK LMY48M RECOVERY THEN DOWNLOAD THE OTA ZIP (CAPTURED ONE ) AND SIDELOAD IT:P

5. HOW TO SIDELOAD OTA (CAPTURED) ZIP:>>1ST DOWNLOAD OTA ZIP 2. KEEP IT ON UR EXT_SD CARD 3.TURNOFF YOUR ANDROID ONE 4.THEN PRESS POWER+VOLUME_UP SIMULTANEOUSLY 5.WHEN U PRESS THOSE BUTTONS THEN ITLL POPUP A MENU THAT IS VOLUME_UP TO CHOOSE AND VOLUME_DOWN TO ENTER 1.RECOVERY MODE 2.FASTBOOT ETC.....6.THEN CHOOSE RECOVERY MODE ITLL BOOT INTO RECOVERY MODE 7.ITLL SHOWSOFF A DEAD ANDROID ROBOT 8.AGAIN PRESS VOLUME UP AND POWER BUTTON SIMULTANEOUSLY,THEN LEAVE VOLUME UP AND TAP IT AGAIN 8.THEN YOULL GET ANOTHER MENU WHERE CHOOSE APPLY UPDATE FROM SD CARD 9.CHOOSE UR FOLDER WHERE U LEFT UR OTA ZIP AND CHOOSE INSTALL WAIT......WAIT....WAIT....WITHIN FEW MINUTES ITLL POPUP AND TELLS APPLY UPDATE FROM SD CARD DONW RESULT WAS (OEM) 10.IF U GET THIS POPUP THEN U R DOING RIGHT! 11.THEN CHOOSE REBOOT FROM STOCK RECOVERY ITLL REBOOT AND NOW YOU"RE ON ANDROID MARSHMALLOW 12.BE PATIENCE COZ FIRST BOOT WILL TAKE SOME TIMES TO BOOT UP

6. IF YOU ARE ON A CUSTOM ROM THEN FLASH UNIVERSAL ZIP VIA CUSTOM RECOVERY LIKE PHILZ/TWRP WHICH WAS EDITED AND MADE BY @1ce FIRE (HE EDITED UPDATER.SCRIPT FROM ORIGINAL OTA ZIP AND MADE IT AS FLASHABLE THROUGH CUSTOM RECOVERY)



WAIT ITLL UPDATE SHORTLY WITH ALL LINKS AND GUIDE:p