Certificate error when trying to establish email account connection

I am trying to connect an email app (AquaMail) on my phone (Sprint Samsung Note 4, stock rooted, Android OS 5.0.1) to my email server (IMAP) using SSL. When I try this, I get the following error message:

Incoming mail server (IMAP): Invalid security (SSL) certificate. java.security.cert.CertPathValidatorException: Trust anchor for certification path not found.

The server to which I am trying to connect is my own VPS. I do have a wild card certificate installed on the site and I believe it is installed properly. I say this because of the report I generated on www.ssllabs.com/ssltest:

• Certificate: 100%


• Protocol Support: 95%


• Key Exchange: 90%


• Cipher Strength: 90%

Two certification paths are shown: mail.mydomain.com -> StartCom Class 2 Primary Intermediate Server CA -> StartCom Certification Authority (one path shows this with SHA1withRSA and the other shows SHA256withRSA).

Looking at the Handshake Simulation section, it clearly shows that Android 5.0.0 functions properly, but is also shows that Java 7u25 has a 'protocol or cipher suite mismatch'. This same warning shows up for other, deprecated systems and is probably due to my having turned off older, insecure access protocols.

Can anyone suggest how to get this working properly? Yes, I could work around this by a) allowing all certificate or b) not using secure protocols; but neither of these are solutions.

Thank you for your help!

Anyone trying to Develop Android 6.0 (marshmallow) ROM for Lenovo A6000/Plus?

Android 6.0 is out for Nexus Devices. Lenovo A6000/Plus is Entry Level Phone which may/maynot get Android 6.0 update. Remember the delay in the Lollipop update . I have contacted the Lenovo India via Twitter & they responded to have no information in regard with this. So I expect developers here to start deveoping a Marshmallow ROM for A6000/Plus could star

Is the Stock Nexus ROM for Android 6.0 enough to develop a ROM for A6000/Plus?
I am not a expert here & would like to see your responses....

Trying to update from My Rom 1.2

Hi all, I need some (or much) help I'm trying to update to the 602 version, to EMUI 3.0 or the lollipop but I really can´t figure out how, downloaded 'My Rom v3.3' according to instructions I should update to 602 I've already downloaded a CWM flashable 'http://forum.xda-developers.com/ascend-p7/general/cwm-flashable-b609-p7-l10-complete-t3004343' tryed to flash CWM via fastboot but nothing happens when I try to go to recovery just as the latest TWRP, What I'm missing? Please help. :crying:

Soft Bricked I think after trying to update Roms.

I was on Color OS 2.1.3

Decided I wanted to try a 5.1.1 custom rom.

Ununified back to default. Installed TWRP and created a backup.

Wiped installed Paranoid Android 5.1.1 this seemed to be working fine untill.
Couldn't copy new files onto the SD card (So could not add Gapps)
Got the 'Could not connect to camera' error.

So then I tried to install Omni 5.1.1 Although no I can't

Copy Files.
Restore the backed up Coloros

I do have color os 1.2.7 and 2.1.3 on external SD although then I use TWRP to install these I starts up and then just gets stuck in a reboot loop.

Anyone got a suggestion of how I can hard rest my phone back to color os?

Thanks!

Help!!! I just bricked my tmobile lg h811 trying to root it! Please help me fix it!

SO I JUST TRIED TO ROOT MY DEVICE AND I DID EVERYTHING THAT I WAS SUPPOSED TO DO WITH THE ROOT TUTORIAL PROVIDED BY THE PEOPLE OF XDA DEVELOPERS.

THREAD NAME IS .. [ROOT] TMO/VZW/ATT/SPRINT/INTL Root your LG G4 with Low Effort Root!

MY DEVICE IS HARD BRICKED AND WHEN I TRY TURNING IT ON, A SECURITY ERROR SHOWS UP AND IT SAYS AUTHENTICATION FAIL #11 ..AND I DONT KNOW HOW TO FIX THIS..PLEASE, PLEASE, PLEASEEEE! ANY KIND OF HELP WOULD BE REALLY REALLY APPRECIATE IT. THANKS.

trying to use a Japanese sim in on originally USA galaxy s5

I came to Japan after speaking0 to sprint about the possibility of using a Japanese SIM card in my phone. They said there'd be no problems I'll just have to unlock the phone before I left which was a completely doable thing by myself without their help. Now once I set up the Japanese sim I can make calls and text but have no access to LTE on my phone. Whenever I'm outside of Wi-Fi range I get a message saying mobile data connection could not be established LTE: ESM - 30 EMM - X I've called Sprint from Japan and tried to resolve the issue, they have walk me through the same steps three different times assuring me that the phone is unlocked on their end and never with a new result. Is there something that I missing it I need to address before I can connect for mobile data connection in Japan with this USA phone.

HELP!! LG G2 D802 Int. 4.2.2 Jelly Bean ... Trying to flash CM12.1

Hello XDA , i'm trying to flash CM12.1 on my G2 using TWRP v2.6.3.2 ... i've been flashing ROMs for 5 years never i encountered this kind of issue ....
1.
i tried to flash the install zip i got this :

Comparing TZ version TZ.BF.2.0-2.0.0086 to TZ.BF.2.0-2.0.078E
Comparing TZ version TZ.BF.2.0-2.0.0091 to TZ.BF.2.0-2.0.078E
assert failed: g2.verify_trustzone("TZ.BF.2.0-2.0.0086" , "TZ.BF.2.0-2.0.0091") == "1"
E:Error executing updater binary in zip '/sdcard/cm-12.1-20151009-NIGHTLY-d802.zip'
Error flashing zip '/sdcard/cm-12.1-20151009-NIGHTLY-d802.zip'
Updating partition details...

And a failed message from TWRP

2. Then i remembered that CM12.1 require LP bootstack so i downloaded lp bootstack loki for d802
and i got an error :
This package is for device: d802; this device is g2.
E:Error executing updater binary in zip '/sdcard/bootstack-d802-LP_30d-loki-signed.zip'
Error flashing zip '/sdcard/bootstack-d802-LP_30d-loki-signed.zip'
Updating partition details...

And a failed message from TWRP

SO is there any help plz reply or redirect me to a thread that fixed that kind of problem
I'm flashed a stock ROM and its working perfectly but i can't flash CM12.1 i didn't try any other ROM so recommend anything PLZ! And Thank You
Additional info : Kernel : Stock 3.4.0
Build Number : JDQ39B
Software version : D80210f-SEA-XX

trying to root Note 4 5.1.1 on 910W8

Hey guys i followed this youtube guide for rooting 5.1.1 using TWRP Method https://www.youtube.com/watch?v=qpsGX_Xoxcg

i downloaded all the files but the firmware (not listen i have n910W8 = telus)

I have odin, supersu, TWRP (which n910w8 is listed) and samsung drivers.

I moved superSU and the TWRP file to root directory of note 4 5.1.1. rebooted into download mode, saw the blue indicator on odin and loaded the file. Rebooted holding volume up this time and tried to load the kernal but it doesnt exist.

I think im confused the TWRP file is NOT the kernal? Where can I get a kernal for n910W8 (telus)

thanks in advance!!

For those having trouble downgrading firmware and trying to root

I know that some people are having some issues working with the flash tool and downgrading their firmware to get root. There IS an easier way. The way I rooted the last time was to:

1) download one of the prerooted flashables (I chose one of the lollipop ones) and put it on my SD card,
2) use Kingroot on the .44 firmware to get temp root
3) install the dual recovery.
4) Once dual recovery installed and booted to TWRP for the first time I did a wipe (may not be necessary) and flashed the pre-rooted .zip
5) wiped cache/dalvik (again, maybe not necessary) and rebooted to rooted lollipop with supersu.
6) If kinguser is still installed (I don't believe it was for me) just uninstall it.

Trying to root my LG G4 H815 but getting error message

I am having a problem while trying to root my . When I try to make sure that my device is connected by typing 'adb.exe devices' through command prompt I get the error message:

* daemon not running. starting it now on port 5037 *
ADB server didn't ACK
* failed to start daemon *
error: cannot connect to daemon

Please help!!!

Trying to port FIUI

Hi, i know that mr aapav01 already ported it, but this version 2.17 and he didn't upload it for no reason or i dont know why :p , so i took 2.23 version from S3 Neo and try to port this
I catched strange artifacts on black screen and then reboot and all will be repeat an infinite number of times
Who can help me with it? :fingers-crossed:
P.S: Sry for my bad eng :)

Nexus 6, Bricked after trying to root Marshmallow

Unlocked/rooted nexus 6 stock no roms/kernals. Earlier today I went to flash the security update so I used nexus toolkit, and I noticed they had the preview for M so I just updated to that. It updated fine and I went to root the phone, only I guess you cant just use the toolkit to root any more because it wouldn't load, it said it was corrupted, so I just re-flashed back to the original update I was on 5.1.1 LMY48l. It installed but and ran through the optimizing apps, once it finished it rebooted and did it again. It kept rebooting and optimizing for a few hours. I read it could be a problem with the cache so I wiped it in recovery mode. Everywhere I read said to factory reset, the only problem is I forgot to backup and now I cant access the files through usb. Is there any was I can recover the files before I factory reset or am I just SOL? Thanks in advanced

Please Help!! Trying to restore phone back to factory settings

Hi all,

Im new here and i was wondering how i would go with setting my phone back to factory settings after it was rooted "i purchased it like this" Bare in mind i live in australia and my model is SM-G900I and im locked to the australian OPTUS network, im needing the factory rom so i can reset the phone, been trying to find on but have had no luck

Thank you

Trying to Build Android 6.0

So I've build aosp in the past for nexus 10 but figured with some xda help we might be able to get this running.
device/samsung/manta/ revision="android-m-preview-2"
kernel is prebuilt and included in device tree
binaries are newest available Android 5.1.1 (LMY48T)

current problem I'm having is with Bluetooth

Code:

---

target thumb C: libbt-brcm_bta <= system/bt/bta/./dm/bta_dm_act.c
system/bt/bta/./dm/bta_dm_act.c: In function 'bta_dm_set_visibility':
system/bt/bta/./dm/bta_dm_act.c:542:5: warning: implicit declaration of function 'BTM_BleReadDiscoverability' [-Wimplicit-function-declaration]
    UINT16 le_disc_mode = BTM_BleReadDiscoverability();
    ^
system/bt/bta/./dm/bta_dm_act.c:544:5: warning: implicit declaration of function 'BTM_BleReadConnectability' [-Wimplicit-function-declaration]
    UINT16 le_conn_mode = BTM_BleReadConnectability();
    ^
system/bt/bta/./dm/bta_dm_act.c: In function 'bta_dm_remove_device':
system/bt/bta/./dm/bta_dm_act.c:669:85: error: 'tBTA_DM_PEER_DEVICE' has no member named 'transport'
                btm_remove_acl( p_dev->bd_addr, bta_dm_cb.device_list.peer_device[i].transport);
                                                                                    ^
In file included from system/bt/bta/../include/bt_target.h:1714:0,
                from system/bt/bta/./dm/bta_dm_act.c:26:
system/bt/bta/./dm/bta_dm_act.c:671:71: error: 'tBTA_DM_PEER_DEVICE' has no member named 'transport'
                                  bta_dm_cb.device_list.peer_device[i].transport);
                                                                      ^
system/bt/bta/../include/bt_trace.h:369:181: note: in definition of macro 'APPL_TRACE_DEBUG'
 #define APPL_TRACE_DEBUG(...)                    {if (appl_trace_level >= BT_TRACE_LEVEL_DEBUG) LogMsg(TRACE_CTRL_GENERAL | TRACE_LAYER_NONE | TRACE_ORG_APPL | TRACE_TYPE_DEBUG, ##__VA_ARGS__);}
                                                                                                                                                                                    ^
system/bt/bta/./dm/bta_dm_act.c:674:56: error: 'tBTA_DM_PEER_DEVICE' has no member named 'transport'
                if(bta_dm_cb.device_list.peer_device[i].transport == BT_TRANSPORT_LE)
                                                        ^
system/bt/bta/./dm/bta_dm_act.c:690:5: warning: implicit declaration of function 'BTM_ReadConnectedTransportAddress' [-Wimplicit-function-declaration]
    if ((other_transport && (BTM_ReadConnectedTransportAddress(other_address, other_transport))) ||
    ^
system/bt/bta/./dm/bta_dm_act.c:701:82: error: 'tBTA_DM_PEER_DEVICE' has no member named 'transport'
                btm_remove_acl(other_address,bta_dm_cb.device_list.peer_device[i].transport);
                                                                                  ^
system/bt/bta/./dm/bta_dm_act.c: In function 'bta_dm_discover_device':
system/bt/bta/./dm/bta_dm_act.c:2318:52: error: 'tBTM_INQ_RESULTS' has no member named 'device_type'
        && (bta_dm_search_cb.p_btm_inq_info->results.device_type == BT_DEVICE_TYPE_BLE)
                                                    ^
build/core/binary.mk:801: recipe for target 'out/target/product/manta/obj/STATIC_LIBRARIES/libbt-brcm_bta_intermediates/./dm/bta_dm_act.o' failed
make: *** [out/target/product/manta/obj/STATIC_LIBRARIES/libbt-brcm_bta_intermediates/./dm/bta_dm_act.o] Error 1

#### make failed to build some targets (22:50 (mm:ss)) ####

---

Sgh-i777 trying to reload firmware

A girl I knows sgh-i777 crashed and only the Samsung logo would come up. It would not go into recovery. I tried using Odin 3.09 and the I777UCLE5 file and it would start then fail. I am not sure what I may be doing wrong.

"Firmware corrupt" error when trying to install Flyme 5 on MX5

I keep getting “Firmware corrupted” message when i try to install it.

My phone is international one from TCCM and i use it in Bulgaria. Right now it runs Flyme version 4.5.2.7l and it seems that this is issue with TCCM devices sold in Europe.

I saw that there is a way to circumvent this on MX3 but there are files with different names in the ROM and i'm afraid that i can brick the phone. Is it safe to use this flashing guide for MX5 and which file is recovery that i need to flash manually?

Attached Thumbnails

 

FC when trying to activate Power Saving mode

Ive a problem when trying to activate the Power Saving mode in settings.
when i press it i always get a Force Close on the Settings app. i can press the quick settings button in the notification area, but that does not seem to activate anything.

anyone has any idea? should i try to clear data on the settings app? or will i lose all of my settings?

thx