Battery - Very weird behaviour

After my stock battery started dying and not holding the charge anymore I bought two new aftermarket batteries (2300mAh) everything went fantastic for some time, then from one day to the other the battery I use daily started draining crazy (even 2% at time) I tried a lot of roms with no luck. Bad battery you say, here is the weird fact, the other battery which used maximum 4-5 times at month keeping it at half-charge, has the EXACT same drain that the other has. Is it possibile that something in the phone has gone nuts and is indicating wrong values? I also ran a full charge-discharge cycle preventing the low battery shutdown through xposed, and it shutdown some minutes after hitting 0%, at full charge indicates 4.300mV is it correct, isn't it?

Also using the *#0228# code (I can't recall now if it's correct) the charge level drops a lot like 30-50% and I noticed that the phone later stays at that % for quite a bit and also the heat from the battery draining stops and the phone stays very cool also while gaming, until it starts draining again

some weird screen after unlocking bootloader in yureka plus

it happens only after flashed something , then while rebooting system the screen glitch appers
but it rides off and get into UI, in UI i havent faced any such glitches
any faced the same thing ? :D

i didnt happen before unlocking bootloader :p

here is the pic of the issue -> https://drive.google.com/open?id=0B4...WxOUExJaWZMSEU

Weird Popup Ad On Lock Screen All Of A Sudden

I haven't used PowerAmp in over a month and just used it today and all of a sudden I'm getting these weird popup ads for pet food with chinese letters on it....anyone else getting these?
Also using CM Locker for the lock screen but this hasn't happened until I started using PowerAmp again...the app is paid & licensed from the Google Play store, not a patched or cracked app...

Weird Calendar Widget Behavior

I'm experiencing strange behavior with the Samsung Calendar Widget (all of them). For some reason, it compresses when scrolling through the home screens and looks squished. Sometimes it even stays compressed. See below screenshot to see what I'm talking about.


Resizing the widget doesn't do anything. Also rebooting doesn't fix it either. At some random point it will revert itself to normal. However I can't seem to find a fix as of yet.

Also the Samsung Calendar Widget is the only Widget that exhibits the above behavior.

Anyone else experience this?

Really weird bluetooth behavior since 6.0 upgrade

So I'm not sure if this is an issue in the Doggcatcher app or not. So here's my setup and details.

Nexus 5 completely stock 6.0. Phone has never been rooted, bought new from Play store. Bootloader is locked.
I am using an LG HBS-730 bluetooth stereo headset
I have 2 numbers on this phone, one is the carrier number (T-Mobile), the other is a Google Voice number that is managed by the most recent version of Hangouts with the Hangouts dialer.

Twice today, I have been listening to a podcast using the Doggcatcher app when an incoming call from my Google Voice number happens through Hangouts. The Doggcatcher app will pause, I will push the call answer button on the headset, and the phone call will begin but the podcast will resume playback at the same time. I can pause the podcast via the app controls on the phone and the call will continue as normal. The caller can hear the podcast as well.

Not sure if it's the app or the OS/bluetooth causing this but it's really confusing. I reported the issue with the developers of the Doggcatcher app, but I haven't posted it to Google yet.

Any ideas?

GT-N8010 bricked after weird "Encryption failed" message

Dear all,

I have read through most (if not all) the other "bricked" device threads, but they don't really fit my problem.

I was on TWRP (sthg) and CM 12.1 (latest) here from the forum.
Everything worked fine for ages.Yesterday I used the device to the latest miliAmpere and only later the connected the complete empty Tab to the Power and restarted it.
Next morning the device showed "Encryption failed" and something that I have to do a factory reset. There was a "reset"-button, but I didn't used it and shutted down the Tab via the power Off function.

Since then the device is not reacting. Currently it is bootlooping into TWRP (!). I cannot switch it off and it actually gets rather hot. The only way to stop this "cycle of death" is to go to download mode...

I already tried to change the recovery to CWM and also to TWRP again via ODIN. ODIN worked fine, but I still cannot start the recovery. TWRP makes a boot loop with its logo and CWM loops without showing anything.

I wonder what will be the next best steps. Odin is working fine, so I don't want to ruin that as well.

What do you think? Is the Bootloader corrupt?
Why does it always boot into recovery (I can't get into a System-Bootloop)?


Any help is really appreciated!

Best,
Jan

Center zone of the touchscreen is dead to finger. MOST WEIRD WORKAROUND EVER.

I have a new Galaxy Note 4 instantly updated to Lollipop 5.0.1 and the very center zone of the screen is literally dead to finger touch, the right edge of the screen is dead too I have some register: (I did reboot, soft reset and hard reset already, didnt work)
[spoiler]


[/spoiler]

Now comes the weirdest thing ever (or maybe its common, I am not expert), but when I place a finger in the edge of the phone (not even the screen edge, just over the metallic edge, like just grabing the phone with one hand), the center zone of the touchscreen works fine and the problem is solved, but the right edge is still with problems, and it is not solved with this strange "finger in the edge" workaround, look :



(If I place other finger in the screen instead of the metallic edge, it solves the problem too)

This is a new phone, is this a issue easily solved and common ?? or I should just change the phone using the warranty ???? Help please, this is a new phone should I ask for another new one without this issues ?

Weird touch screen problems

Attached youtube video.

It works when in hand but when on flat surface it goes haywire

Anyone have a fix for this issue?

What more info would it require to pin point what cause it?

https://www.youtube.com/watch?v=qp1fiCPw1aA